Protect polished surfaces with biocompatible coating

​​Polished surfaces are highly sensitive to handling and are easily damaged by scratching, hitting or corrosion. A thin hard ceramic coating, which does not change the polish grade, can be applied to protects the surface and eliminate expensive re-polishing.

CemeCon’s hard ceramic coatings can be used in the pharmaceutical and food industry as they comply with FDA requirements for food and medico (non-toxic, tested according to the ISO 10993-5 standard).

+45 70 22 11 61info@cemecon.dk

Medical device in transparent PC, metallized

Before coating

Parts Problems with parts sticking to the core, high demolding force, and plastics deposits on the cores causing > scratches on the parts inner wall, frequent and difficult cleaning, and wear and fretting on the conical part.

Coated with CCMold HyperSlip CrN

The insert was coated with CCMold HyperSlip CrN to ensure better release of the molded parts and to protect the high-gloss polished area from wear and scratches. At the same time, the customer got a better flowing of the plastic material into the cavity. The secondary surfaces of the tool were also coated and thus protected against corrosion due to degassing from the plastic.

The biocompatibility requirement was met as CCMold HyperSlip CrN from CemeCon is approved for food and medico according to ISO 10993-5.

Our PVD Sputter coatings follow exactly surface contours. Therefore, we can protect all kinds of surface finish – i.e. polished surfaces, eroded, etched and textured surfaces.

You might be interested in these articles.

Back to News
Reduce deposits and wear from recycled plastics

HyperSlip and HiPIMS coatings from CemeCon are designed to reduce deposits substantially, make the cleaning…

Date:
11/09/2023
Certificates of Compliance

CCMold, CCForm and CCCom coating has been tested for in vitro toxicity according to ISO…

Date:
21/04/2022
Coatings can protect against corrosion

The surface of plastic processing tools is exposed to a variety of corrosive agents from…

Date:
19/03/2021
CemeCon expands with new HiPIMS PVD machine

Our new HiPIMPS coating machine is installed and ready for operation.

Date:
25/03/2020
Interview with Plastindustrien

Plastindustrien, interviewed our CEO Konrad Bienk about his ambitions and future plans for CemeCon Scandinavia.

Date:
30/09/2019
Nærbillede af bore bits

Explore your options:

Order Form: Describe your task or challenge directly using our order form.
Order Information: View detailed information about your order here (available in Danish).
Talk to an Expert: Give us a call to have a conversation with one of our talented employees (available in Danish).

+45 70 22 11 61info@cemecon.dk